|
• Balanced articulated joint
smooth and precise movement |
• Special steel
superior hardness
perfect wire hold
resistance to corrosion |
• Hard chrome finish
for high resistance
during sterilization |
• Tungsten carbide cutting inserts
diamond honed for precise
wire cutting and long-lasting results |
• Ergonomic handles
smooth edges
for easy guidance |
|
Classix™ pliers and cutters
Classix™ pliers and cutters are manufactured with the most advanced manufacturing technology
available and superior quality material. Due to the demand to offer instruments value-for-money. A range of 10 instruments has been selected to meet any
orthodontic basic requirement.
Classix™ pliers and cutters are manufactured with a special and superior hard steel to afford an
optimal wire hold and resistance to corrosion of tips.
All Classix™ instruments feature a special inner balanced joint allowing a smooth and precise,
long lasting movement.
Classix™ cutters’ cutting edges have tungsten carbide inserts, diamond honed for precise cutting
of wires and pliers’ long lifetime.
All cutters are entirely hard chrome finished for high resistance during sterilization.
Classix™ instruments feature ergonomic handles and smooth rounded surfaces to allow the
orthodontist for easy handling and best operational precision.
 |
P2101-00
Bird beak plier Angle style
Necessary for working round wires up to .045” (1,14 mm).
Beaks are only .025” (0,64 mm) at the tip to bend loops and omega loops, even small
ones. A 10° angle is ground on the sides of the rectangular beak to compensate for
wire spring-back in the modelling stage.
Beaks are parallel at .020” (0,51 mm) plier opening and diamond honed to prevent
wire scoring. |
 |
P2102-00
Omega loop forming plier Tweed style
Concave beak is contoured for making more uniform omega loops with ease. The round
beak has three sections: .045” (1,14 mm), .060” (1,52 mm), .075” (1,90 mm) and
made of a hard electro etched alloy to prevent wire slippage. Tip can be easily replaced
with the use of the allen wrench. |
 |
P2103-00
Three-jaw plier
The central beak is precision aligned and when the plier is closed, it fits over the level
of the two lateral beaks to form bends more acute than 90°.
The tips are slightly tapered and diamond honed to prevent wire scoring.
For round wires up to .036” (0,9 mm). It allows the activation of quad helix, palatal bars
etc. in the oral cavity as well. |
 |
P2104-00
Utility plier Weingart style
The tips are shaped to firmly hold wires and devices and perfectly angled to
enhance the visibility of the operative field.
The two beaks are diamond honed to make it lip safe. |
 |
P2105-00
Band removing plier
When the plier is closed, the non-padded remover tip does not get in contact with the
acetalic resin pad: this allows it to make lever on the tube or the accessory, or on the
edge of the band facilitating the safe removal from the mouth. |
 |
P2106-00
D.B. bracket removing plier
The tapered tips wedge between both edges of the base of the bracket and the tooth
surface: by slightly lifting off, the bracket is easily removed without any damage to the
enamel. Useful also for removal of ceramic brackets. |
 |
P2107-00
Rectangular arch forming plier Tweed style
For handling square or rectangular wires, torqueing and forming precision bends. The
beaks are designed to be parallel at .020” (0,51 mm) plier opening and diamond
honed to prevent wire scoring. |
 |
P2108-00
Distal end cutter with safety hold
Designed for cutting the excess of distal wire and holding the loose archwire safely. The
special design and the accurate sharpening of the cutting edges make it to be functional
with either thin or coaxial wires.
Caution: maximum cutting capacity: round wires .020” (0,51mm)
rectangular wires .022”x.028” (0,56x0,71 mm). |
 |
P2109-00
Hard wire cutter
The hard structure, the quality of the cutting edge sharpening allow the use of it with
any size and type of wires for fixed orthodontics.
When closed, the working ends match at the tip only in order to assure a precise handling
with any archwire size.
Caution: maximum cutting capacity: round wires .020” (0,51mm)
rectangular wires .022”x.028” (0,56x0,71 mm). |
 |
P2110-00
Ligature cutter
The tips are 15° angled for better field vision near the bracket’s tie wings.
The cutting inserts have wide backing ledges to guarantee the maximum anchorage to
the body of the instrument.
Caution: maximum cutting capacity:
round wires .015” (0,38 mm) |
|
Subscribe to our Newsletter
Should you need information on our line and new products from our manufacturing.
